How to Fix the Fiber in the Fiber Optic Splice Closure

Greentel Fiber Optic Splice Closure includes a connector body, a front and rear dust cover, an extrusion sleeve, and the like. The front part uses a ceramic tube with a very light connection surface to ensure the contact of the optical fiber and improve the durability. An elastic sleeve at the rear prevents the fiber from being torn.

Fiber optic splice closures are widely used today. It is precisely because of the development of optical fiber communication technology and the coverage of the national network. The requirements for fiber optic splice closures are also gradually increasing. There are also requirements on the length of the reinforcing elements for fiber optic splice closures, and the length of the reinforcing parts is required. Suitably, if the fiber optic splice closure reinforcement is pressed on the core bundle tube, the core bundle tube will be deformed by force and cause excessive loss, and the optical fiber in the core bundle tube will also be fractured due to long-term stress, leaving the project with Hidden danger.

The fixing of the optical cable must ensure that the position of the optical fiber in the fiber optic splice closure does not loosen, thereby avoiding the increase of optical fiber loss or the problem of fiber breakage due to the displacement of the optical cable. The fixing of the optical cable is divided into fixing of the reinforcing member and fixing of the rest of the optical cable.

The reinforcement must be fixed in its length. It is too long to fit in the fiber optic splice closure; it is too short to fix the cable. Generally, when cutting reinforcements, the distance between the clamping plate of the fixed cable and the screws of the fixed reinforcement should be equal to the length of stay. The rest of the fiber optic cable is fixed after the reinforcements are fastened, tighten the clamping plate with screws, and tightly fix it on the fiber optic cable inlet of the joint box.

https://www.greentelftth.com/ supplies a variety of quality Fiber Optic Splice Closure for different application.

Annonser

Fiber Closure Performance Advantages and Sealing Features

Greentel Fiber Closure performance advantages: Stainless steel fiber optic splice closure is a competitive fiber optic splice closure, leading in the industry, a symbol of high quality. All stainless steel structure design adopts imported high quality stainless steel to ensure the product’s service life exceeds 30 years. Reasonable installation design, quick and easy installation, fixed and reliable fiber cable introduction, reinforced core fixing device, excellent airtightness and reliable sealing performance It has high anti-aging performance and can adapt to all kinds of climatic discs. Its bending radius is larger than 45mm to ensure the minimum loss of fiber joints.

The fiber optic splice closure is the key application in the connection of optical cables. Optical fiber connection is an important component in the construction of optical cable lines. The quality of the optical cable connection directly affects the construction quality and affects the optical communication quality. It is very important to improve the quality of the cable connection in the construction of the line.

The sealing of the fiber optic splice closure is mainly the sealing between the optical cable and the joint box and the upper and lower cover plates of the joint box. When the optical cable and the joint box are sealed, the optical cable jacket of the sealing part needs to be polished firstly.

The gauze is axially ground on the outer sheath on the vertical cable, so that the optical cable and the sealing tape are combined tightly and sealed better. The sealing between the upper and lower cover plates of the fiber optic splice closure is mainly to pay attention to that the sealing tape should be uniformly prevented from being tightened in the sealing groove of the fiber optic splice closure, and the screws are tightened without leaving gaps.

Annonser